In the third part of this video series, Dr. Farhad Boltchi combines both hard and soft tissue grafting techniques for advanced reconstruction around implant sites.

In the second part of this three-part series, Dr. Farhad Boltchi reviews grafting techniques on patients who do not have a soft tissue defect.

In the first video of this three-part series on hard and soft tissue grafting, Dr. Farhad Boltchi shows a couple of techniques for a predictable outcome and the importance these therapies have in implant therapy.

In this live presentation, Dr. Dan Butterman will give a recap of DS World 2024.

In this third installment of Dr. Farhad Boltchi's 2024 Full Arch Update, he discusses an alternative to overdentures and minimally invasive techniques for bone preservation.

In the second part of this three part series, Dr. Farhad Boltchi reviews the workflows for a smart denture conversion.

In the first part of this three-part series, Dr. Farhad gives an update on workflows on removable overdentures.

In this video, Dr. Mark Fleming discusses connector design for a Katana bridge. The thread can be viewed here:https://www.cdocs.com/discussion-boards/view/id/89004

In this video, Dr. Jonathan Ford will discuss a recent patient and how the use of rubber bands aided in his overall treatment.

Dr. Dan Butterman walks you through the required steps in setting up the software for your Primescan 2

Dr. Dan Butterman reviews the basic setup of the hardware for the new Primescan 2.

In this video, Dr. Dan Butterman will take you through the advanced features and cutting-edge technology that make the Primescan 2 an efficient tool for dental professionals. Dan will walk through the PrimeScan 2's features which include enhanced scanning speed, superior accuracy, and intuitive design that can simplify workflows. Whether you're a seasoned pro or new to digital dentistry, the PrimeScan 2 scanner is designed to improve every step of your practice. Additional videos are available for our CDOCS Resident, CDOCS Fellow and CDOCS Mentor Members.

This webinar will go through the basics of manufacturing a splint. We will review scanning techniques and software setup along with best practices for predictable splint design and manufacturing. As a bonus we will learn a technique to directly print retainers using the new Splint ST resin.

When you think of full arch implant treatment, what usually comes to mind? It's generally large aggressive reductions, free-handed surgery, and substantial effort from a provisionalization perspective in the conversion of a denture. Luckily, these basic paradigms have evolved into much more efficient, predictable, and conservative treatment. In this presentation, we will explore the principles of conservative FP1 treatment in contrast to traditional FP3 treatment and we will also investigate the use of stackable guides with their corresponding temporization modalities.

In this video, Dr. Mark Fleming helps with virtual seating of restoration. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88576

In this video, Dr. Mark Fleming gives a critque for a MB design. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88328

In this video, Dr. Mark Fleming gives feedback on an immediate cantilever bridge. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88321  

In this CDOCS tutorial video, our product manager will demonstrate how easy it is for a new or existing CDOCS user to log onto the website. Also, should a password be forgotten, we'll show you how to reset your password and get back to the great digital dentistry content on CDOCS.com

Watch this video to learn how to navigate the CDOCS website in order to register for one of our comprehensive digital dentistry workshops either in Scottsdale, AZ or in Charlotte, NC. Choose the type of workshop, the dates and your contact information as well as any comments you'd like to pass onto our clinical staff. Once submitted, our team of dental experts will contact you in regards to your upcoming workshop and work out any details. We can't wait for you to attend one of our best in class digital dentistry workshops. 

This webinar will go over all the new improvements with the CEREC 5.2.10 chairside software. We will preview new block materials launching soon that are included in this software, and review parameters and often overlooked features that improve efficiency.

In this video, Dr. Mark Fleming gives some tips on an immediate Maryland Bridge. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88241

In this video, Dr. Mark Fleming gives some tips for a Screw Retained Implant restoration. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88240

This free webinar will review the concept of fully open Prime manufacturing. Covering 3D printing and milling, attendees will learn the process to bring in scans directly from Trios or any intraoral scanner. These scans can be used to create models, splints, provisionals and even full dentures with a 3D printer. In addition, attendees will also learn the fully open chairside manufacturing workflows with Primemill. Bringing in scans directly from Trios or any scanner, attendees will see how simple a single unit crown appointment can go from start to finish in under 90 minutes.

Join Dr. Steven Hernandez to experience the seamless fusion of CEREC and CBCT technologies, revolutionizing the landscape of implant dentistry with unmatched precision and efficiency

In this video, Dr. Mark Fleming shows how to use Positioning to get a better proposal. The thread can be viewed here: https://www.cdocs.com/discussion-boards/view/id/88043

In this video, Dr. Dan Butterman will take you through the advanced features and cutting-edge technology that make the Primescan 2 an efficient tool for dental professionals. Dan will walk through the PrimeScan 2's features which include enhanced scanning speed, superior accuracy, and intuitive design that can simplify workflows. Whether you're a seasoned pro or new to digital dentistry, the PrimeScan 2 scanner is designed to improve every step of your practice. Additional videos are available for our CDOCS Resident, CDOCS Fellow and CDOCS Mentor Members.

Dr. Dan Butterman reviews the basic setup of the hardware for the new Primescan 2.

Dr. Dan Butterman walks you through the required steps in setting up the software for your Primescan 2

In this video Dr. Meena Barsoum will walk through the work flow of acquiring data using CEREC and then designing a splint by utilizing the Splint Application in InLab.

With the addition of Lucitone resins with the Primeprint, Dr. Dan Butterman will give an overview of the workflows associated with Dentures in DS Core.

This video will discuss the fundamentals of preparation design for posterior teeth for both partial and full coverage restorations. The video also shows some tips and tricks for proper isolation of margins.

In this video Dr. Meena Barsoum gives an overview of the Primeprint Solution.

This webinar will go through the basics of manufacturing a splint. We will review scanning techniques and software setup along with best practices for predictable splint design and manufacturing. As a bonus we will learn a technique to directly print retainers using the new Splint ST resin.

In this video Dr. Meena Barsoum demonstrates how to change the resin cartridge in the material unit of the Primeprint.

In this video Dr. Meena Barsoum focuses on the specific parts and pieces of the Primeprint.

Dr. Meena Barsoum will walk you through the steps of installing the 5.2.9 software on your machines and discuss some of the pop-ups that you may encounter and how to go about uninstalling old software to open space on your machine.

This video discusses some basic preparation criteria and is recommended for view prior to the doctors attending their basic training. While the training itself is constantly evolving, the video covers some basics that are universal for all new users.

In this video Dr. Meena Barsoum will demonstrate how to load a resin cartridge into the material unit.

In this video, Dr. Jonathan Ford will discuss a recent patient and how the use of rubber bands aided in his overall treatment.

In this series of videos, Dr. Dennis Fasbinder discusses one of the foundations of not only CEREC dentistry but any type of restorative dentistry. So much of the success of a restoration is dependent on the preparation. In this video, he discusses general preparation principles of posterior crowns.

In this video Dr. Meena Barsoum will give a general overview of the Post Processing Unit (PPU).

In this video Dr. Meena Barsoum will demonstrate the solid model work flow using the Primeprint.

In this initial video of the Self Guided CEREC Learning program, Dr. Mike Skramstad gives an overview of the Primescan Acquisition Unit. This video is only the start to an immersive introduction to the CEREC Primescan Acquisition Unit. ​ ​In this video, we unlock the gateway to precision and efficiency as we explore the seamless integration of CEREC technology and the transformative capabilities of the Primescan Acquisition Unit. The Primescan Acquisition Unit is a revolutionary device that elevates the standard of intraoral scanning. Dive into the cutting-edge world of digital dentistry as CDOCS showcases how this unit seamlessly interfaces with CEREC, a renowned CAD/CAM system, to redefine chairside restoration. Dr. Skramstad guides you through the user-friendly interface, highlighting how the acquisition unit effortlessly integrates with CEREC to facilitate streamlined chairside restorations.

Dr. Dan Butterman will review the changes to Canvas within the most recent DS Core update.

In this video Dr. Meena Barsoum will review the routine actions for the Primeprint.